Share this page

EBC 545

5.25" Intel® Core™ 2 Quad/ Core™ 2 Duo/ Celeron® Embedded CPU Board with Dual Display/ 1 x PCI/ 1 x PC/104+/ 2 x GbE
  • Main Feature
  • Support Intel® Core™ 2 Quad, Core™ 2 Duo, Celeron® Processor
  • Intel® GM45 with GMA4500MHD Graphic Engine
  • 2x 240-pin DDR3 DIMM socket, up to 8 GB non-ECC 1066 MHz DRAM
  • 2x Intel® 82574L PCI Express Gigabit Ethernet
  • 1 x Realtek ALC888 HD CODEC
  • 6 x USB 2.0, 4 x Serial port, 4 x SATA
  • 1 x PCI Slot/ 1 x PC /104+ slot
Add to Inquiry
Datasheet(PDF)
CPU Support Intel® Core™ 2 Quad (Q9100 2.26GHz) (non longevity CPU) Intel® Embedded Processor List (Intel® Longevity CPU): Intel® Core™ 2 Duo (T9400 2.53GHz); Intel® Celeron® 575 2.0GHz
Main Memory 2 x 240-pin DDR3 DIMM Socket, up to 8GB non-ECC1066 MHz DRAM
Chipset Intel® GM45 Intel® ICH9-M
BIOS Award System BIOS PnP and ACPI support 8M bits SPI ROM
On-board LAN 2 x Intel® 82574L PCI Express GbE Support PXE and Wake on LAN (When 5Vsb available)(LAN1 only) 2 x RJ45 (180˚/90˚ option)
Display Intel® GM45 integrated GMA4500MHD Graphic engine Analog VGA Interface: One 2 x 8.0mm box header Resolution up to 1600 x 1200 at 85 Hz, 2048 x 1536 at 75Hz LVDS1 Interface: 2 x DF13 20-pin LVDS connector for internal connection support single (24bit) or dual pixel (48bit) LVDS panel LVDS2 (Through SDVOB w/ CH7308B) Interface: 2 x DF13 20-pin LVDS connector for internal connection support single (24bit) or dual pixel (48bit) LVDS panel SDVO Interface (option, one 30-pin box header): EBK SDVO1 (SDVOC w/ CH7307C DVI transmitter w/ DVI-Single link output) CCFL Interface: 2 x CCFL for Panel Backlight Inverter Composition: VGA+LVDS1; VGA+DVI; LVDS+DVI; LVDS1+LVDS2
Audio Realtek ALC888 HD CODEC 1 x Mic-in/1x Line-out
Expansion 1 x PCIe x1 1 x PCI
I/O Interface Serial port: 3 x COM support RS232 and 1 x COM support RS232/ RS422/ RS485 (BIOS setting) Parallel port: 1 x 26-pin box header USB 2.0: 6 x ports by JST connector x 3 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V) 2 x 2-pin 2.54mm header for Power LED/HDD Active LED 1 x 4-pin and 1 x 3-pin Fan connector 1 x PS/2 KB/MS via pin header On board Buzzer/SMBus2.0 /Reset SW 1 x 5-pin header for IrDA
Watchdog Timer WDT can be programmable by Software from 1 sec to 255 sec and from 1 min to 255 minutes (Tolerance 15% at 25°C)
Storage 2 x SATA port 1 x CF socket
System Monitor Monitoring of 5 voltages and 2 temperatures 5 Voltage (+5V, Vcore, +12V, +3.3V, +1.5V) 2 Temperatures (CPU, External Temperature) 2 fan speed monitor (CPU, system)
Power Requirements Supports both AT and ATX Mode (default setting is ATX mode) ATX mode:
2x5pin ATX power connector w/ +12V/-12V/+5V/5Vsb Power In
2x2pin power connector +12V Power In
At ATX Mode, the BIOS setting is as follow:
POWER -SUPPLY TYPE: [ATX]
AUTO PWR-FAILURE RESUME: [ON] AT mode:
2x5pin ATX power connector w/ +12V/-12V/+5V Power In
No Power On push Button, Software Shutdown function and LAN remote wake up
Dimensions 5.25" form factor/203mm (L) x 146mm (W) (7.9"x 5.7")
Environment Operation temperatures: 0°C to 60°C Storage temperatures: -20°C to 85°C Humidity: 10% to 90%, non condensing
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!